In most cases, you will find the pairing procedure either in the user's manual or on the box of the remote. If you are unable to find it, you could follow the general steps listed below:
- Turn the vehicle off.
- Press and hold the "Pair" button until the LED light on the remote blinking. Then let go of the "Pair" button. The "Pair" button for different remotes are vary. It is normally the button in the middle of the remote, or the button with the car logo, or press and hold "Forward" and "Reverse" buttons at the same time.
- Turn the vehicle back on.
- If the LED light on the remote stops blinking, then the pairing procedure is done.
- If the remote does not pair with the remote it may be due to interference or timing. Please kindly repeat the steps above again.
If you are unable to figure out which button is the "Pair" button or are unable to pair the remote for some reason, feel free to contact us here.